Connection
Connect the two small antennas to the X1Node Physical, placing them on the sides, and the large one in the middle.
Use the cable to connect X1Node Physical to the Wi-Fi router.
Connect X1Node Physical to a power source by plugging it into a socket.
Attention:
DexNX1Node Physical ode can be connected and disconnected from the UPS as needed, but frequent disconnections should be avoided to maintain stable operation.
It is recommended that each X1Node Physical be connected to a separate power source. You must ensure that the power supply can handle the load to avoid overloads and interference with data transmission.
Placement requirements
Organize a convenient and safe place to place the device, eliminating mechanical damage and interference in operation.
When connecting, make sure that the wires are not under tension, and the device can be easily connected to both the router and the outlet at the same time.
The device must be constantly connected to the Internet and a power source. This will ensure network stability and the integrity of all work processes.